« Bluetooth VAS PC VAS 5054A Interface with ODIS VW Audi Skoda V4.1.3 Diagnostic and Online Programming Tool

VAS 5054A interface is diagnostic tool for audi/vw/skoda/seat.VAS PC VAS5054 with ODIS VW V4.1.3 software and support Bluetooth connection.VAS 5054A 4.1.3 odis vag with all new chip on ink main board and work more stable.

Bluetooth VAS PC VAS 5054A Interface ODIS VW V4.1.3 VW Diagnostic Tool


Software Version: ODIS 4.1.3  (ODIS 4.1.3 software need to active, obd2repair.com offer you activation for free)

Update: By CD

Language:support multi-language

Connection: Bluetooth and USB

Support Vehicle: AUDI/VW/SKODA/SEAT

Operate System: win 7 32bit

Feature: with buzzing  (when the connection is not correctly with buzzing)


The VAS 5054A is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers.
The integrated Bluetooth interface connects the vehicle with a notebook, desktop PC or test system.
No cables are needed for vehicle diagnostics using the VAS 5054A.
The range of the wireless Bluetooth connection is 2 to 5 meters,depending on the environment and the type of Bluetooth adapter used on the PC side.
The Serial Port Profile (SPP) is used for data transfer via Bluetooth. Different Bluetooth security levels are supported.
The vehicle protocols are handled directly in the VAS 5054A.
This ensures fast response times and a reliable real-time behavior independently of the PC operating system. Every time a connection is established, the VAS 5054A software is identified with the version installed on the application PC. The VAS 5054A thus automatically adopts any new features provided after a new software version has been installed on the application PC.
The diagnostic application and the associated Diagnostic Base System are installed on the application PC.
The diagnostic base system can access the VAS 5054A via Bluetooth or USB.
Access Via Bluetooth: After a connection to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.You need to specify this port when you install the diagnostic application.
Access Via USB: You can also connect the VAS 5054A to the application PC by using the supplied USB cable. Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the VAS 5054A is then complete and the device is ready for use by the diagnostic application.
The Following Vehicle Bus Systems are Supported:
K line (ISO9141-2)
High-speed CAN (ISO 11898-2)
Low-speed CAN (ISO 11898-3)
J1850 (SAE J1850)
UDS Protocol
PWM Protocol

VAS 5054A ODIS VW 4.1.3 PCB Show:


VAS 5054A ODIS VW 4.1.3 Package List:


1 x VAS 5054A interface with ODIS VW 4.1.3 software CD